Today's Offers
Today's OffersHide
Help us contribute to Homes for our Troops with brand bulbs
FREE SHIPPING on orders over $99
0 items in your cart
Cart Subtotal: $0.00

Add $99 to qualify for Free Ground Shipping*

ONLY 11.95 flat rate shipping on orders under $99.

* Some exclusions applyView Details

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

Bulbrite Non Dimmable 2W 2200K Vintage CA10 Filament LED Bulb

SKU: B776503 | Ordering Code: LED2CA10/22K/FIL-NOS  | UPC: 739698765037

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a conventional 25 watt bulb
  • Estimated life of 13.7 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal

Lighting Facts Per Bulb

Brightness 180 lumens
Estimated Yearly Energy Cost $0.24
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day13.7 years
Light Appearance
2200 K
Energy Used2 watts
  • Clearance

Bulbrite Vintage Filament Decorative dimmable 2 watt CA-10 LED bulb generates as much light as many 25 watt incandescent filament bulbs. 

  • Compatible with some electronic low voltage dimmers such as Lutron Skylark # SELV-300P-WH, a maximum of 6 bulbs per circuit
  • Antique finish for authentic vintage feel with very warm 2200K extra long LED filaments

  • Candelabra (E12) base for use in chandeliers and sconces
  • No lead or mercury for easier disposal and a better environment

  • Saves 36 watts in electricity compared to a 25 watt CA-10 incandescent decorative bulb

  • Long life - Rated to still put out 70% as much light after 15,000 hours of operation as it does when brand new

Do not use in fully enclosed fixtures because heat buildup will shorten life. Do not "hot swap" this bulb. Turn off fixture before replacing existing bulb.

Full Specs



Product Line

Vintage LED Filament

Model Number


Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
2 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
Incandescent/Halogen Equivalent
25 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.


The end (or ends) of the lamp that fits into the socket.
Candelabra (E12)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
Bulb Shape
Bent Tip

Bulb Color

The color of the light produced by a bulb
Bulb Color
Warm White


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (Lumens)

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
Bulb Finish

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
Bulb Technology

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Class and Filament

A designation used to describe the shape or structure of the filament in an incandescent or halogen light bulb. Most commonly used for specialty products like rough service and antique replica lamps.
Class and Filament

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)


5 year limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location
Customer Reviews



Good color.......uses 2 watts


Albany, NY


Great bulb and very good color for incandescent look.


Used for outdoor sconce lighting. Good color for antique fixtures. Had only one "dud" in an order of over 100 bulbs.


Dallas, TX

Beautiful bulb and light


We have these in a chandelier that cannot be dimmed. Therefore, fewer lumens and a yellower light was desired, and these deliver. They are still bright enough to provide plenty of light on our upstairs landing/hall/staircase. My only complaint is that a few of them didn't seat completely in the socket, as the bottom contact point seemed a little shorter on some than on others.


New Britain, CT


Bulbrite Non Dimmable 2W 2200K Vintage CA10 Filament LED Bulb

4.3 3


Q & A
are they completely dimmable? do they flicker when they are dimmed?


This bulb is a non-dimmable bulb.


This lamp is dimmable and will not flicker if used with a compatible dimmer. Unfortunately the lamp manufacturer only lists a short list of compatible dimmers, and only one from Lutron, which is our supplier of wall mounted dimmers. The Lutron dimmer that is compatible is # SELV-300P, and is offered in multiple color options. Per the lamp manufacturer if this dimmer is used with up to 6 lamps in 6 sockets you won't experience flickering. If you'd like to special order this product please contact Customer Service.