Sorry, this product is not available to purchase.
- Energy efficient replacement for a 175 watt HID bulb
- Estimated life of 45.7 years based on 3 hours use per day
Lighting Facts Per Bulb
|Brightness 3336 lumens|
Estimated Yearly Energy Cost $3.49
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day45.7 years
|Energy Used29 watts|
NaturaLED's 29 watt LED floodlight fixture is equivalent up to a 175 watt HID fixture. An efficient, energy saving replacement for metal halide and high-pressure sodium fixtures. Wide-angle adjustable knuckle mount with angle indications from 30º to 90º. Heavy duty knuckle mount supports the floodlight that best suits your needs.
Application - Area, spot, architectural and signage lighting
- 1/2" knuckle mount
- Uniform and consistent color
- Aluminum die cast housing
- Excellent thermal design
- IP66 outdoor rated
- UL listed and Title 24
- Operating temperature -22°F - 122°F
- DLC listed
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-22 to 122
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
The decorative finish of the item.
|Aluminum die cast housing
|1/2" knuckle mount
|5 year limited
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are two levels, Standard and Premium
Code identifying the product in DLC (DesignLights Consortium) listings.