Free Shipping on orders over $99
empty
0 items in your cart
Cart Subtotal: $0.00

Add $99 to qualify for Free Ground Shipping*

ONLY 11.95 flat rate shipping on orders under $99.

* Some exclusions applyView Details
Instant Rebates are available to businesses Click to find out about your location
 
1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The LED Authority

Light Efficient Design 120 Watt 5000K Wallpack Retrofit LED Lamp, Ballast Compatible

SKU: LED-8090M50-MHBC | Ordering Code: LED-8090M50-MHBC  | UPC: 844006082758

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a 400 watt HID bulb
  • Estimated life of 45.7 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Lighting Facts Per Bulb

Brightness 10000 lumens
Estimated Yearly Energy Cost $14.45
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
5000 K
Energy Used120 watts
  • Clearance

Light Efficient Design 120 watt non-dimmable retrofit LED lamp replaces a 320 watt or 400 watt Shoebox/Wallpack metal halide lamp. This lamp operates with most pulse start and probe start magnetic 320 watt (M132) or 400 watt (M59) Metal Halide ballasts only.

  • Rotatable base enables the lamp to accurately direct output to where it is needed
  • Type V optics
  • Can be mounted base up, base down or horizontal
  • UL damp rated for open and fully enclosed fixtures
  • Operating temperature -40ºF to 122ºF
  • Type V beam angle
  • Minimum fixture size requirements:  13.26"L x 6.33"W x 6.33"H
Full Specs

Brand

Light Efficient Design

Model Number

LED-8090M50-MHBC

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
120 Watts

HID Equivalent

The wattage value of a High Intensity Discharge (HID) bulb of similar brightness.
 
HID Equivalent
400

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120-277

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Mogul (E39)

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Bright White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
77

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
5000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
10000

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
 
Operating Temperature (°F)
-40 to 122

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
 
Beam Angle (°)
180

Bulb Power Type

Defines how a lamp is powered, whether it needs a ballast or not, or can use either
 
Bulb Power Type
Ballast Compatible

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
11.4

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
4.3

Mounting

Horizontal or vertical

Warranty

5 year limited

Ballast Code

The ANSI (American National Standards Institute) code that the ballast conforms to. For HID bulbs, indicates that the bulb is compatible with ballasts that conform to that standard.
 
Ballast Code
M132, M59

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Rated for Fully Enclosed Fixtures

Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
 
Rated for Fully Enclosed Fixtures
Yes