Light Efficient Design's vertical non-dimmable vertical 12 watt 4 pin G24q base LED PL lamp is a hybrid bulb that can either work with a 13W, 18W or 26W CFL ballast or a 120-277V line voltage bypass application.
- Works with a 13W, 18W or 26W compatible electronic CFL ballast or line driven in a ballast bypass application
- Minimum fixture dimensions 6" wide and 6" high
- Suitable for dry and damp locations only
- For use in open fixtures only. Not rated for use in enclosed fixtures.
Installation for plug 'n play application:
- Power off the fixture
- Carefully remove the installed CFL lamp(s)
- Verify CFL ID information for compatibility with the LED lamp
- Insert the LED lamp into all open socket(s) within the fixture
- Turn power on
Do not "hot swap" this lamp. Turn off fixture before replacing existing bulb. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.