Sorry, this product is not available to purchase.
This 48" LED Ready strip fixture uses one 4' bypass LED bulb. Ready for bypass LED bulbs that accept power on one end only. Ideal for warehouses, retail, commercial buildings and work areas.
LED bulb not included. To be used with a single ended ballast bypass bulb only.
- Die formed and rigidly fabricated
- LED ready with non-shunted sockets
- Can be surface or chain mounted (chain not included)
- High gloss baked enamel finish
- 22 gauge housing
- Operating temperature varies depending on the lamp used
|LED 48" Narrow Strip Fixture For 1 T8
|Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
The decorative finish of the item.
|Surface or suspended
|2 year limited
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment