Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Litetronics Non-dimmable 1W Red S11 LED Bulb

SKU: LD01512CR | Ordering Code: LD01512CR  | UPC: 706762690212

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a conventional 15 watt bulb
  • Estimated life of 22.8 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal
Description
  • On
    sale

Lifetronics Brand S11 DIMMABLE 1 watt flood LED bulb generates as much light as many 15 watt halogen bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • Saves 14 watts in electricity
  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
  • UL listed for Wet Location

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Brand

Litetronics
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
1 Watt
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
15 Watts
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
120
Base
The end (or ends) of the lamp that fits into the socket.
Medium (E26)
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
S-11
Bulb Color
The color of the light produced by a bulb
Red
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
Opaque
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
LED
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
25000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-5 to 110
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
2.4
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
1.38
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes