Sorry, this product is not available to purchase.
- Ignites up to two T8HO/T10HO/T12HO lamps
- On
sale
Fulham Brand IceHorse 3 Low Temperature Electronic Ballast. Ideal for refrigerator/freezer cases, coolers and vending machines. 120/277 Volt.
- Lamp Operation Mode: Programmed Start
- Power Line Frequency: 50/60Hz
- Current Protection: Fuse
- Lamp Connection: Parallel
- Ignition Method: Programmed Pre-Heat Start
- Minimum Operating Temperature: -22°F
IH3-UNV-272-T12HO Electronic Ballast Ignites One or Two F48 T8HO, F60T8HO, F48T10VHO, F60T10VHO, F48T12HO, F60T12HO, F72T12HO; One F72T8HO, F72T10VHO and F96T12VHO.
Brand | Fulham |
Input Volts | 120/277 |
Number of Lamps | 1/2 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
| Electronic |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 12 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 1.7 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1 |
Lamps by Wattage | 1x48W, 1x60W, 1x72W, 1x96W, 2x48W, 2x60W, 2x72W |
Warranty | 3 years |
Ballast Lamp Type
The type of bulb the ballast can fire.
| T8HO/T10HO/T12HO |
Maximum Current (Amps)
The maximum amount of Amps that a ballast can hold.
| 1.2 |
Maximum Load (Watts)
The maximum power that a product can handle.
| 150 |
Start Type
For Ballasts, indicates the method the ballast uses to start its bulbs. HID ballasts can be Probe or Pulse start. Fluorescent ballasts can be Rapid, Instant or Programmed start. For HID and Fluorescent bulbs, indicates the start-type of ballast that the bulb will work with.
| Programmed |