Sorry, this product is not available to purchase.
- Estimated life of 45.7 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Lighting Facts Per Bulb |
Brightness 1349 lumens |
Estimated Yearly Energy Cost $2.05
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
Life
Based on 3 hrs/day45.7 years
|
Light Appearance
WarmCool
2700 K
|
Energy Used17 watts |
MaxLite 17 watt flush mount LED retrofit is ideal when upgrading round flush mount fixtures to LED. Allows for use with any diffuser type, permitting a wide assortment of applications.
-
Robust heat sinking design
-
AC-IC design needs no AC/DC driver = longer life
-
Can fit either center nipple or twist & lock mounted diffusers
-
Can be used on glass or polymer diffused fixtures
-
Construction indludes glass barrier ring, metal standoffs, aluminum clad PCVA and integral aluminum heat sink
-
Compatible with Lutron dimmer # CTELV-303P-WH
-
UL Classified when installed into a ceiling flush mounted luminaire with a minimum 8.5" diameter x 3" deep inside volume
- Replaces older 4 Pin fluorescent technology
Brand | MaxLite |
Model Number | FRK17X7.5-927 |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 17 Watts |
Fluorescent Equivalent
The total wattage of fluorescent lamps in a fixture that this fixture replaces.
| 52 |
Line Voltage | 120 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 91 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 2700 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 1349 |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 50000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| 0 to 104 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| LED |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 0.75 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 7.7 |
Mounting | Friction fit |
Warranty | 5 year limited |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |