Sorry, this product is not available to purchase.
- Estimated life of 3.7 years based on 3 hours use per day
Ushio brand MR16 Red halogen spot. 50 Watts for more power and light. 12 volts for low voltage systems. Low voltage means a smaller filament, for greater optical control.
-
Transparent Red design allows more light through the glass, resulting in a brighter light
-
Red color perfect for decorative and festive applications
-
Spot design means 12º beam spread and a narrow beam of light. Lamp can be farther away and still light the area effectively
-
Dichroic reflector reflects visible light out the front while letting heat escape out the back, resulting in a cool beam of light
Glass lens - enclosed fixture not necessary
Brand | Ushio |
Model Number | FND/FG |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 50 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 12 |
Base
The end (or ends) of the lamp that fits into the socket.
| GU5.3 |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| MR-16/L |
Bulb Color
The color of the light produced by a bulb
| Red |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 100 |
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Clear |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| Halogen |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 4000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 12 |
Class and Filament
A designation used to describe the shape or structure of the filament in an incandescent or halogen light bulb. Most commonly used for specialty products like rough service and antique replica lamps.
| C-8 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 1.75 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 2 |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Not For Sale In
This bulb falls within State-defined sales restrictions for the listed States.
| MA, NV, CA & DC |