Sorry, this product is not available to purchase.
- Ignites up to two 4-Pin/T5/T5HO/T9 Circline/T10/T12 lamps
- On
sale
Fulham Brand FireHorse 4 Electronic Emergency Ballast. Designed to immediately switch to emergency mode when the primary AC power is interrupted. 120/277 Volt.
Cross reference with Bodine # B60.
- Location Rating: Damp
- Frequency: 60hz
- Listing: Emergency
- Test Indicator: LED
- Minimum Emergency Operation: 90 Minutes
- Minimum Charging Operation: 24 Hours
- Ballast Lamp Starting Mode: Programmed Start
- Similar to Bodine B60
FH4-DUAL-700L Emergency Ballast Ignites:
- One or two lamp 9W-32W, One lamp 42W CFT/CFQ/CFTR 4 Pin
- One or two lamp 9W-18W, One lamp 24W-39W, One lamp 40W, One lamp 50W-55W FT/CFM/FQL 4 Pin
- One lamp 15W-30W, One lamp 40W, One lamp 55W Circular FCRT5
- One lamp 20W-32W, One lamp 40W Circular FCRT9
- One lamp 10W-28W, One lamp 38W-39W 2D/4P
- One lamp F4-F13 T5 Low Wattage
- One lamp F14-F35-T5 Standard
- One lamp F24-F39, F54 T5 High Output
- One or two lamp F13-F25, F28, F30-F32; One lamp F35-F40, F58-F72 T8 Standard (Includes U-Bent)
- One lamp F44, F55-F86 T8 High Output
- One or two lamp F14-F25, F30-F40, One lamp F50-F75 T12/T10 Standard (Includes U-Bent)
- One lamp F25-F48, F55-F96, F100-F110 T12 Hight Output
Brand | Fulham |
Input Volts | 120/277 |
Initial Lumen Output
The lumen output at first start-up.
| 700 |
Number of Lamps | 1/2 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
| Electronic |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 9.4 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.4 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1.5 |
Lamps by Wattage | 1x100W-110W, 1x115W-215W, 1x40W, 1x42W, 1x50W-55W, 1x58W-96W, 1x9W-32W |
Warranty | 3 year limited |
Ballast Lamp Type
The type of bulb the ballast can fire.
| 4-Pin/T5/T5HO/T9 Circline/T10/T12 |
AC Input (Watts)
| 3.5 |
Charging Current (Amps)
The amount of current to charge a battery.
| 280 |
Start Type
For Ballasts, indicates the method the ballast uses to start its bulbs. HID ballasts can be Probe or Pulse start. Fluorescent ballasts can be Rapid, Instant or Programmed start. For HID and Fluorescent bulbs, indicates the start-type of ballast that the bulb will work with.
| Programmed |