Sorry, this product is not available to purchase.
Energy Station Double Ended High Pressure Sodium Growing System is ideal for flowering with a 2000K color temp. This fixture will also accomodate a 1000W Metal Halide bulb for vegatative growth stage.
- 1000W High Pressure Sodium Double-Ended Lamp Included
- 120V Power Cord Included
- Dual Input Voltage: 120V/240V
- Dimmable: 100%, 75%, & 50%
- No Assembly Required
- Bulb: One Year Limited Warranty
- Ballast: Two Year Limited Warranty
- IP21 rated for damp location
- PAR Output: 1980 µmol/m²/s
- Burning position - horizontal
- UL listed
Brand | EnergyStation |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 1000 Watts |
Line Voltage | 120/240 |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 25 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 2000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 150000 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -22 to 122 |
Bulb Type Supplied
Type of bulb supplied with the fixture
| High Pressure Sodium |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 21 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 11 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 6 |
Finish
The decorative finish of the item.
| Aluminum |
Power Factor | 0.99 |
Total Harmonic Distortion (THD)
Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
| 10% |
Housing | Aluminum |
Lamps by Wattage | 1x1000W |
Mounting Position | Horizontal |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Dimming
Dimming ballasts provide dimming capability when used with an appropriate controller and lamp.
| 50%/75%/100% |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |