Sorry, this product is not available to purchase.
American Lighting constant voltage hardwire driver, Class 2, RoHS compliant. 100-130V AC input providing a 12V DC output, 50/60Hz input via built-in terminal block with strain relief screw-down cover. Dry location use only.
Use with American Lighting Omni Pucks. Supports 9-13 Omni LED pucks in dimming applications using most standard (triac) incandescent, reverse phase and electronic low voltage dimmers. For non-dimming applications 1-14 Omni pucks can be attached.
- Max. load - 45 watts
- Minimum load - 1 watt (non-dimming), 18 watts (dimming)
- Input voltage - 100-130 VAC
- Output voltage - 12VDC
- Power factor - 0.95
- Dimmable with forward phase, reverse phase, ELV or TRIAC
- Input wire - 12 AWG max.
- Output wire - 12 AWG max.
- Do not use in outdoor applications
Brand | American Lighting |
Model Number | ELV-45-12 |
Input Volts | 100-130 |
Output Voltage
A measure of electrical potential, expressed in volts. Voltage "force" is the measurement of pressure that pushes electrical current through a conductor.
| 12 |
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
| -22 to 122 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 7.06 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 2.38 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 1.38 |
Power Factor | 0.95 |
Warranty | 1 year limited |
Maximum Load (Watts)
The maximum power that a product can handle.
| 45 |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |