Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Diode LED BLAZE™ BASICS 16.4 ft. 100 LED Tape Light Kit, 12V, 4200K, With Plug-In Adapter

SKU: DI-KIT-12V-BC1PG60-4200 | Ordering Code: DI-KIT-12V-BC1PG60-4200  | UPC: 848333027055

Sorry, this product is not available to purchase.

Options

Color Temperature (Kelvin)
Color Temperature Guide 2700 3000 3500 5000 6300

Product Highlights

  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 100 lumens
Estimated Yearly Energy Cost $2.89
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
4200 K
Energy Used24 watts

Diode LED BLAZE™ BASICS 100 LED Tape Light Kit, 24V, 4200K, 16.4 ft. Spool with Plug-In Adapter

Diode LED BLAZE™ Basics are new value engineered LED tape light leveraging the advances in efficient, cleaner technology, newer circuit design, streamlined manufacturing, and economies of scale. This flexible linear LED lighting features 90+ CRI, this enhanced flexible linear lighting is backed by a 7-year warranty.

 Diode LED products support the needs of lighting design professionals, architects, electricians and contractors. Diode LED is solely focused on delivering high-quality and complete LED lighting solutions with superior performance and high quality color-rendering.

  • 120° light beam angle 
  • 100 lumens per foot
  • 90+ CRI
  • Maximum run up to 27 feet
  • Plug-in power supply uses any standard 120 volt outlet
  • Non-Dimmable 
  • Includes a 5 pack of tape-to-wire terminal block connectors
  • Mounts with 3M Adhesive backing
  • Cut points every 2 inches  

 

Full Specs

Brand

Diode LED

Product Line

Blaze Basics
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
24 Watts

Input Volts

120
Output Voltage
A measure of electrical potential, expressed in volts. Voltage "force" is the measurement of pressure that pushes electrical current through a conductor.
12
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
90
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
4200
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
100
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-4 to 176
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
196.8
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
0.39

Warranty

7 year limited