Philips Bodine B90 Linear Fluorescent Emergency Ballast for (1) 32 to 40W

SKU: B90 | Ordering Code: B90 | UPC: 663015105032

Bodine B90 Philips B90 Linear Fluorescent Emergency Ballast for (1) 32 to 40W

Printer friendly

$84.99each

Ballast

Add to Cart

Save to BulbTrack

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Order within the next 9 hours 14 minutes to ship today

Add 2 to your cart to get free ground shipping *

Product Highlights

Ignites one T8/T12/4-Pin/T8HO/T12HO lamp

Description

Philips Bodine B90 emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one compact galvanized case. When AC power fails, the B90 immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp life shutdown circuits.

Can be used with most 32-40 watt 4' T8, T12 or 4-pin long compact fluorescent lamps without an integral starter, Ubend, HO, VHO, circline and energy saving. Also compatible with most one, two, three or four lamp electronic, standard, energy saving and dimming AC ballasts.
Optimized for one-lamp operation
Produces 500-600 lumens of initial emergency light output, depending on the type of lamps
Suitable for indoor and damp locations and for sealed and gasketed fixtures, including fixtures rated for wet locations
Battery
- High temperature maintenance free
- Nickel-Cadmium
- 7-10 year life expectancy
Battery charging current - 280 mA
Recharge time - 24 hours
Ambient temperature - 32ºF - 122ºF
Test switch - Single pole
AC input current - 280mA
Illumination time - 90 minutes
Single pole test switch

Full Specs

Brand	Bodine
Product Line	Philips Bodine
Input Volts	120/277
Initial Lumen Output The lumen output at first start-up.	500-600
Number of Lamps	1
Ballast Type Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.	Electronic
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	9.4

Width (in) For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.	2.4
Height (in) For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.	1.5
Lamps by Wattage	1x32W-40W
Warranty	1 year limited
Ballast Lamp Type The type of bulb the ballast can fire.	T8/T12/4-Pin/T8HO/T12HO
AC Input (Watts) The amount of watts to operate emergency lamps.	3.5
Charging Current (Amps) The amount of current to charge a battery.	280