Sorry, this product is not available to purchase.
- Estimated life of 22.8 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Sunlite 3 Watt Sea Turtle and Wildlife Certified Red A-19 LED Lamp
- Wildlife Lighting Certification: 2016-019
- Recommended for use in areas where artificial lighting is needed adjacent to ecologically sensitive areas, sea turtles nesting beaches, migratory corridors, and Dark Sky Friendly communities.
- Must be installed in a certified or downward directed fixture that shields the light source from being visable from the nearby beach.
Brand | Sunlite |
Model Number | 80148-SU |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 3 Watts |
Base
The end (or ends) of the lamp that fits into the socket.
| Medium (E26) |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| A-19 |
Bulb Color
The color of the light produced by a bulb
| Red |
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
| 20 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 100 |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| LED |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 25000 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 240 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 4.2 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 2.3 |
Dark Sky Compliant
Dark Sky Compliant products have been approved by the International Dark Sky Association (IDA), which ensures that the Upward Light Output Ratio of the product is deemed "full cut-off" or "fully shielded". This means that the luminous intensity (in candelas) at or above an angle of 90 above nadir is zero, and the luminous intensity (in candelas) at or above a vertical angle of 80 above nadir does not numerically exceed 10% of the luminous flux (in lumens) of the lamp or lamps in the luminaire.
| Yes |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |
Rated for Fully Enclosed Fixtures
Not all LED bulbs are suitable for use in enclosed fixtures, due to the amount of heat they generate. Rated bulbs have been tested and approved as safe for enclosed fixtures.
| no |