Sorry, this product is not available to purchase.
- Energy efficient replacement for a conventional 60 watt bulb
- Estimated life of 22.8 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Lighting Facts Per Bulb
|Brightness 550 lumens|
Estimated Yearly Energy Cost $0.9
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day22.8 years
|Energy Used7.5 watts|
Eliminate internet black zones in your home with the Sengled Boost. With each bulb you connect, the range of your wi-fi is increased. More bulbs means more places to enjoy your content without worrying about slower speeds. They're great at illumination too. Dimmable with app software. Winner of the CES Innovation Award for 2015.
Do not use with external/wall mounted dimmers as this will permanently damage the product.
Compatible with all smart devices which support Wi-Fi, IEEE 802.11b/g/n standard at 2.4 GHz
Not for use in damp or wet locations.
The transmitter power could vary with network conditions and environmental factors, including volume of network traffic, building materials and construction, network interference and network overhead, lower actual data throughput rate.
Includes one light bulb/Wi-Fi repeater, user manual and limited written express warranty.
- Easy to set up with extended Wi-Fi signal coverage
- Two built-in antennas supporting high speed data throughput rate up to 300Mbps
- Individual as well as collective switching and dimming control of LED lights
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
The wattage value of an incandescent or halogen lamp of similar brightness.
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
The end (or ends) of the lamp that fits into the socket.
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
The color of the light produced by a bulb
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
|Color Temperature (Kelvin)
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
The surface finish of a bulb, which may affect the quality of the light emitted.
The technology implemented by the bulb, e.g. incandescent, halogen, LED
|Average Rated Life (hr)
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
|Operating Temperature (°F)
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
|-4 to 95
|Beam Angle (°)
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
Number of Lamps
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
|1 year limited
The wireless protocol that a smart lighting item operates on.
Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.