Sorry, this product is not available to purchase.
On
sale
Lightolier Lytespan Radius Track is a one circuit electrical distribution system designed to support and supply all Lytespan lighting units in a flexible manner. This 4' track may be combined with various fittings to create straight runs or patterns. The track may be field cut at any location.
Mounting - The track may be surface mounted to a ceiling or wall. May be stem mounted or mounted to a grid ceiling with flat or regressed panels. Not intended to be cable mounted.
Electrical - Capacity is 20 amps at 120V 60Hz per branch circuit (2400 watts max. per branch circuit). Track units and electrical fittings are polarized and continuously grounded throughout. The track must be wired in accordance with National Electric Code and Local Codes.
Mechanical - The electrical fittings plug into the track units and lock securely creating an electrical mechanical assembly. The aluminum track provides a rigid support that supports Lytespan lighting fixtures. Lytespan lighting fixtures may be attached at any point along the track.
Finish - All painted finishes are baked enamel. Raw Aluminum finish is clear anodized and furnished with black connectors
- Toggle bolts and screws furnished with track unit
- Radius track is 0.062" wall thickness. Aluminum extrusion
- Conductors - 20 amp capacity. "U" shape provides reliable contact with connectors
- Polarity bead identifies the neutral conductor
- Insulated liner is 0.032" wall high temperature extruded thermoplastic
- Insulated washer (furnished with track) insulates mounting screws from conductors
- Dead end cap (included) on one end is molded thermoplastic
- T-bar mounting clips are needed to mount the track to the "T" bar ceiling runners. The clips attach through existing holes in the track. Do not exceed 4' spacing of clips
- For a regressed T-bar application a # 9188 clips are needed
- For a square edge application # 9189 clips are needed
Brand | Lightolier |
Product Line | Lytespan |
Line Voltage | 120 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 48 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 1.375 |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
| 0.5 |
Finish
The decorative finish of the item.
| White |
Mounting Position | Ceiling or wall |
Maximum Current (Amps)
The maximum amount of Amps that a ballast can hold.
| 20 |