Green Creative Dimmable 8.5W Horizontal 4 Pin 3500K G24q LED Bulb, Ballast Compatible

SKU: 28368 | Ordering Code: 8.5PLH/835/DIR | UPC: 638362283689

Green Creative 28368 8.5PLH/835/DIR Dimmable 8.5W Horizontal 4 Pin 3500K G24q LED Bulb, Ballast Compatible

Printer friendly

$19.99each

Add to Cart

Save to BulbTrack

Quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home.

In StockReady to ship

Add 5 to your cart to get free ground shipping *

Options

Bulb Color

Color Temperature Guide Cool White Neutral White Soft White Warm White

Product Highlights

Estimated life of 45.7 years based on 3 hours use per day
No lead or mercury means easy and environmentally safe disposal

Description

DLC
Listed

The horizontal mounted PL LED lamp from Green Creative is a plug 'n play LED replacement for CFL downlights with a 4-pin G24q or GX24q (electronic ballast) socket. Voltage is ballast compatible 120-277V. Compatible with 13W, 18W, 26W, 32W and 42W non-lensed fixtures only. Simply take out the existing CFL lamp and replace with the Green Creative PL LED lamp. No bypassing of the existing ballast is needed. DLC Listed

Dimmable on 0-10V circuits.

Easy to install - Plug 'n play direct
Ballast output power control technology allows for high performance even on lower powered ballasts, making it a suitable replacement for 13W, 18W, 26W, 32W and 42W CFL PL lamps
Lamp wattage used is based on ballast type
Lumen output
- 13W ballast - 550 lumens
- 18W ballast - 650 lumens
- 26W ballast - 950 lumens
- 42W ballast - 1050 lumens
The base can be rotated 310º to fit any socket configuration. After installation simply rotate the lamp to achieve maximum light output
Not intended for use in fully enclosed fixtures

Do not "hot swap" this lamp. Turn off fixture before replacing existing bulb. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.

Product Documents

Full Specs

Brand	Green Creative
Model Number	8.5PLH/835/DIR
Energy Used A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.	8.5 Watts
Base The end (or ends) of the lamp that fits into the socket.	G24q
Bulb Shape The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".	Twin Tube Alt
Bulb Color The color of the light produced by a bulb	Neutral White
CRI Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.	80
Color Temperature (Kelvin) An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).	3500
Brightness (Lumens) A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.	550/650/950/1050
Bulb Finish The surface finish of a bulb, which may affect the quality of the light emitted.	Opaque
Bulb Technology The technology implemented by the bulb, e.g. incandescent, halogen, LED	LED
Average Rated Life (hr) A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.	50000

Operating Temperature (°F) The ambient temperature in which the product can safely operate.	-4 to 95
Beam Angle (°) The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.	110
Bulb Power Type Defines how a lamp is powered, whether it needs a ballast or not, or can use either	Ballast Compatible
Length (in) Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.	6.4
Width (in) For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.	1.3
Orientation The angle that the fixture can be mounted at	Horizontal only
Mounting	Horizontal
Warranty	5 year limited
Damp Location Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment	Yes
DLC Listing Approved by the DesignLights Consortium, a collaboration of utility companies and regional energy efficiency organizations. Approved products meet the consortium's standards for ensuring high-quality, energy-efficient lighting design. There are three categories, Standard, Premium and Horticultural, plus Luna for light-pollution minimization.	Standard
DLC Code Code identifying the product in DLC (DesignLights Consortium) listings.	PK9WW6N5
Dimmable Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.	Yes