Bulbs.com

243 Stafford St.

Worcester, MA 01603

Tel. 1 (888) 455-2800

Fax 1.508.363.2900

www.bulbs.com

The Business Lighting Experts

Lithonia Dimmable 12.7 Watt 3000K Recessed LED Downlight Retrofit, Wet Rated, Title 24 Compliant

SKU: 224VNN | Ordering Code: 6BPMW LED M6  | UPC: 753573467816

Sorry, this product is not available to purchase.

Product Highlights

  • Energy efficient replacement for a conventional 75 watt bulb
  • Estimated life of 45.7 years based on 3 hours use per day
Description

Lighting Facts Per Bulb

Brightness 725 lumens
Estimated Yearly Energy Cost $1.53
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
3000 K
Energy Used12.7 watts
  • On
    sale

Lithonia 12.7 Watt 3000K recessed LED downlight is equivalent to a 75 watt incandescent.

  • Title 24 compliant
  • Wet rated
  • Retrofit into existing downlight cans
  • Suitable for installation in standard and shallow-height rough-in sections
  • Twin torsion sptings ensure easy installation
  • Aluminum die cast reflector with deep baffle for reduced glare
  • Inner reflector cone funnels light through the pressed-in diffused lens
  • Primary power disconnect provided for simple connection to a dedicated LED connector in the housing
Full Specs

Brand

Lithonia Lighting

Model Number

6BPMW LED M6
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
12.7 Watts
Incandescent/Halogen Equivalent
The wattage value of an incandescent or halogen lamp of similar brightness.
75 Watts

Line Voltage

120
Base
The end (or ends) of the lamp that fits into the socket.
Medium (E26)
CRI
Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
83
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
3000
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
725
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
50000
Operating Temperature (°F)
The ambient temperature in which the product can safely operate.
-4 to 104
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
80
Bulb Type Supplied
Type of bulb supplied with the fixture
LED
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
3.9
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
7.5
Finish
The decorative finish of the item.
White
IC Rating
IC is short for Insulation Contact. This means that any housing with the IC rating can make direct contact with ceiling insulation. Generally these housings can handle up to 100 watts of light output.
IC and Non-IC
Installation Type
The way in which a fixture attaches to its relevant surface.
6" Can

Warranty

5 year limited
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Yes
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Yes
Title 24 Compliant
California Building Energy Efficiency Standards for Residential and Non-Residential Buildings.
Yes
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
Yes