Sorry, this product is not available to purchase.
- Estimated life of 1.4 years based on 3 hours use per day
Lighting Facts Per Bulb |
| Brightness 550 lumens |
|
Estimated Yearly Energy Cost $4.7
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day1.4 years
|
|
Light Appearance
WarmCool
2850 K
|
| Energy Used39 watts |
Sylvania brand PAR30 halogen wide flood. 39 Watts and 130 volts for more power and light. Medium (E26) base.
-
Halogen lights provide brighter, whiter light than incandescents, while maintaining outstanding color rendering
-
Wide Flood means 50º beam spread and a wider beam of light. Lamp can be closer and still light the area effectively
Brand | Sylvania |
Model Number | 39PAR30/HAL/WFL |
Energy Used
A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
| 39 Watts |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 130 |
Base
The end (or ends) of the lamp that fits into the socket.
| Medium (E26) |
Bulb Shape
The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
| PAR-30 |
Bulb Color
The color of the light produced by a bulb
| Soft White |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 2850 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 550 |
Bulb Finish
The surface finish of a bulb, which may affect the quality of the light emitted.
| Clear |
Bulb Technology
The technology implemented by the bulb, e.g. incandescent, halogen, LED
| Halogen |
Average Rated Life (hr)
A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
| 1500 |
Beam Angle (°)
The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
| 50 |
Class and Filament
A designation used to describe the shape or structure of the filament in an incandescent or halogen light bulb. Most commonly used for specialty products like rough service and antique replica lamps.
| C, CC-8 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 3.625 |
Diameter (in)
Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
| 3.752 |
Dimmable
Indicates whether a product can be dimmed in conjunction with a suitable dimmer control.
| Yes |
Not For Sale In
This bulb falls within State-defined sales restrictions for the listed States.
| MA, NV, WA, CA & DC |