Today's Offers
Today's OffersHide
Get 20 free bulbs with purchase of $199 or more, use code 20BULBS at checkout.
15% off all Lunera products. Use promo code LUNERA15 at checkout.
New low prices on brand bulbs
Get a free Monkey fan with this BloomBoss kit. Use promo code MONKEY at checkout.
FREE SHIPPING on orders over $99

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

Philips 120 Watt Equivalent, 19.5 Watt, 120 Volt DIMMABLE 45,000-Hr 3000K Soft White LED PAR38 Bulb

SKU: 421222 | Ordering Code: 19PAR38/END/F25 3000 DIM

Sorry, this product is not available to purchase.

Product Highlights

  • Estimated life of 41.1 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal

Lighting Facts Per Bulb

Brightness 1200 lumens
Estimated Yearly Energy Cost $2.35
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Based on 3 hrs/day41.1 years
Light Appearance
3000 K
Energy Used19.5 watts

Philips EnduraLED Brand DIMMABLE 19.5 Watt narrow flood lamp generates as much light as many 120 Watt halogen lamps. Can smoothly dim down to 10% power.

  • Uses AirFlux Technology which provides optimal thermal efficiency in a sleek, lightweight design
  • Perfect to use anywhere you are using a 120 Watt PAR38 halogen lamp

  • No lead or mercury means easy and environmentally safe disposal

  • 1200 Lumens initial light output is comparable to most 120 Watt halogen lamps, while saving 100.5 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 45,000 hours of operation as it does when brand new

  • Energy Star qualified

Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life.  DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb

Full Specs


Philips Lighting

Product Line


Model Number

19PAR38/END/F25 3000 DIM

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
19.5 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.


The end (or ends) of the lamp that fits into the socket.
Medium (E26)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
Bulb Shape

Bulb Color

The color of the light produced by a bulb
Bulb Color
Soft White


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (Lumens)

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
Center Beam Candle Power

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
Bulb Finish

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
Bulb Technology

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
Beam Angle (°)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)


ENERGY STAR is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. ENERGY STAR-certified devices use less energy without compromising functionality.


Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
Customers Also Viewed
Customer Reviews

not told by the salesperson that it was


works great, clear lighting. Brings out the best color of items

Tony, the printer

Fernandina Beach, Florida

Good replacement for Halogen PAR38


Finally, a good (in fact, superior) replacement for PAR38 halogens. In a track lighting application, we found these to be: - a bit more directional (narrower beam) - a bit cooler, but not bad. - much brighter than 90w halogens One plus is that LED bulbs don't change much when dimmed, while halogens get much warmer in color when dimmed.


Grafton, MA


120 Watt Equivalent, 19.5 Watt, 120 Volt DIMMABLE 45,000-Hr 3000K Soft White LED PAR38 Bulb

4.5 2


Q & A
Are any of the PAR38 wet location for outside in PAR holders?


Yes, wet location PAR lamps can be used in outdoor applications. Note that it should not be used in a fully enclosed fixture, but one that allows for proper ventilation.