Maxlite 9W Dimmable 4 Pin Vertical Color Selectable (3000K/3500K/4000K) G24q LED Bulb, Ballast Compatible

The vertical mounted dimmable lamp from Maxlite is a plug 'n play LED replacement for CFL downlights with a 4-pin G24q-1, G24q-2 and G24q-3 (electronic ballast) socket. Voltage is driven by the installed ballast. Directly replaces a 26 watt 4-pin CFL. Simply take out the existing CFL lamp and replace with the Maxlite lamp. No bypassing of the existing ballast is needed. 

• Color selectable at 3000K, 3500K or 4000K
• Base rotates 180° for proper alignment
• Dimmable with compatible dimming ballast
• Replaces a 26 watt CFL
• Suitable for use in enclosed fixtures
• Compatible with Lutron DV-600P, MACL-153M, CTCL-153P and DVCL-153P dimmers
• 5 year limited warranty. Product may be eligible for a warranty extension to 10 years for an additional fee.  Contact a Bulbs.com Lighting Specialist for details.

For a list of compatible ballasts please contact a Bulbs.com Lighting Specialist at 888-455-2800. 

Installation: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with the Maxlite lamp
• Insert the Maxlite lamp into all open socket(s) within the fixture
• Turn power on

DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb. This lamp only operates on electronic ballasts. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.