Eiko 9W 2 Pin Vertical 3000K G24d LED Bulb, Ballast Compatible

The vertical mounted non-dimmable lamp from Eiko is a plug 'n play LED replacement for CFL downlights with a 2-pin G24d (magnetic ballast) socket. Voltage is driven by the installed ballast. Compatible with 13, 18 or 26 watt non-lensed and non-dimming fixtures only. Simply take out the existing CFL lamp and replace with this LED lamp. No bypassing of the existing ballast is needed. -4°F to 113°F ambient temperature. Not for use in fully enclosed fixtures. 

Not compatible with most older CFL ballasts built in 2003 and earlier, dimming ballasts and some non-mainstream off-brand ballasts.

Not intended for use in lensed downlights.

For a list of compatible ballasts please a Bulbs.com Lighting Specialist at 888-455-2800.

Installation: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with this lamp
• Insert the lamp into all open socket(s) within the fixture
• Turn power on

DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb. This lamp only operates on magnetic ballasts. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.