Halco 12W 4 Pin Vertical 4000K G24q LED Bulb, Ballast Compatible

The vertical mounted non-dimmable lamp from Halco is a plug 'n play LED replacement for CFL downlights with a 4-pin G24q socket. Works with 26W, 32W and 42W electronic CFL ballasts. Equivalent to a 26W CFL. Simply take out the existing CFL lamp and replace with this lamp. No bypassing of the existing ballast is needed. Use in dry locations only. Not for use in enclosed fixtures. 

Compatible with 26W, 32W and 42W electronic CFL ballasts. Not for use with line voltage. Contact a Bulbs.com lighting specialist to confirm if your existing ballast is compatible.

Not intended for use in lensed downlights.

Installation: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with this lamp
• Insert the lamp into all open socket(s) within the fixture
• Turn power on

DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.