Lunera Dimmable 13W 2 Pin Vertical 4000K G24D LED Bulb, Uses Existing Ballast

The vertical mounted dimmable lamp from Lunera Lighting is a plug 'n play LED replacement for CFL downlights with a 2-pin G24d (magnetic ballast) socket. Voltage is driven by the installed ballast. Compatible with 18W, 26W, 32W and 42W non-lensed and fixtures only. Simply take out the existing CFL lamp and replace with this lamp. No bypassing of the existing ballast is needed. Use in dry locations only. Not for use in totally enclosed fixtures. 

Not compatible with most older CFL ballasts built in 2003 and earlier and some non-mainstream off-brand ballasts. Not for use with line voltage. Contact a Bulbs.com lighting specialist to confirm if your existing ballast is compatible.

Not intended for use in lensed downlights.

Installation: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with this lamp
• Insert the lamp into all open socket(s) within the fixture
• Turn power on

DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb. This lamp only operates on magnetic ballasts. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.