Green Creative 6W Horizontal 2 or 4 Pin 4000K G24 Hybrid LED Bulb

Green Creative's non-dimmable G24 lamp is a Hybrid LED replacement for 2 or 4 pin 13-18 watt G24 CFLs with a magnetic ballast. Supports both magnetic ballast operation and ballast bypass operation at 120V-277V 50/60Hz. -4°F to 95°F ambient temperature.

• Directly replaces a 13 - 18 watt 2 or 4 pin CFL lamps
• Compatible with G24d,GX24d, C24q, and GX24q lamps 
• Works with a magnetic CFL ballast (see below) or can run off of line voltage
• 120-277 universal voltage

Installation for plug 'n play application: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with the LED lamp
• Insert the LED lamp into all open socket(s) within the fixture
• Turn power on

Magnetic ballast compatibility

• Philips Advance # LC-13-TP
• Philips Advance # H-1B13-TP-W
• Philips Advance # H-2B13-TP-BLS-M
• Sola # FCF-13-TP
• Keystone # CC1322MTP

Ballasts that do not appear on the list above might still be compatible but have not been tested by Green Creative. 

Do not "hot swap" this lamp. Turn off fixture before replacing existing bulb. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.