Lunera Dimmable 11W 4 Pin Vertical 4000K G24q LED Bulb, Uses Existing Ballast

The vertical mounted Lamp from Lunera Lighting is a dimmable plug 'n play LED replacement for CFL downlights with a 4-pin G24q or GX24q (electronic ballast) socket. Directly replaces 13W, 18W, 26W, 32W and 42W CFLs (4-pin). Can be used in open or fully enclosed fixtures, indoor or outdoor. Dimming feature requires a dimmable ballast. Voltage is driven by the installed ballast. Simply take out the existing CFL lamp and replace with the Helen lamp. No bypassing of the existing ballast is needed. -40°F to 160°F ambient temperature. DLC listed.

For a list of compatible ballasts please contact a Lighting Specialist at 888-455-2800. 

Installation: 

• Power off the fixture
• Carefully remove the installed CFL lamp(s)
• Verify CFL ID information for compatibility with the Helen lamp
• Insert the Helen lamp into all open socket(s) within the fixture
• Turn power on

DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb. This lamp only operates on electronic ballasts. If the lamp does not light when the luminaire is turned on, remove the lamp from the luminaire. If the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove lamp.