Sorry, this product is not available to purchase.
- Ignites up to two T5 lamps
Lutron brand Electronic Dimming Ballast for Two F54T5/HO Fluorescent Lamps with line voltage of 120-277.
Lutron's Hi-Lume 3D electronic dimming ballasts provide a full-range of 100% to less than 1% fluorescent dimming.
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance
- Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without going to full brightness
- Low harmonic distortion throughout the entire dimming range maintains power quality
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
- Ultra-quiet operation
- Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
Brand | Lutron Electronics |
Input Volts | 120/277 |
Input Watts | 114 |
Number of Lamps | 2 |
Ballast Factor | 1 |
Ballast Type | Electronic |
Length (in) | 18 |
Width (in) | 1.18 |
Height (in) | 1 |
Power Factor | 95% |
Total Harmonic Distortion (THD) | <10% |
Lamps by Wattage | 2x54W |
Ballast Lamp Type | T5 |
Start Type | Programmed |
Load Rating (Volts) | 120-277 |
Dimming | Yes |
Product Notes: Dedicated voltage models used most often in pre-existing fixtures. Using Reduced Harmonics (.88 Ballast Factor) Standard Ballast Factor ballasts will provide consistent, efficient light. Typical Application: Industrial factory and warehouse space with basic, no-frills overhead lighting.