Sorry, this product is not available to purchase.
- Ignites up to three T8 lamps
Lutron electronic dimming ballast for three F32T8 and U-bent fluorescent lamps with 120-277V. Lutron's Hi-Lume electronic dimming ballast provides a full range of 100% to less than 1% fluorescent dimming.
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance
- Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without going to full brightness
- Low harmonic distortion throughout the entire dimming range maintains power quality
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
- Ultra-quiet operation
- Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
Brand | Lutron Electronics |
Input Volts | 120-277 |
Input Watts | 100 |
Number of Lamps | 3 |
Ballast Factor | 1 |
Ballast Type | Electronic |
Length (in) | 9.5 |
Width (in) | 2.4 |
Height (in) | 1 |
Power Factor | 95% |
Total Harmonic Distortion (THD) | <10% |
Lamps by Wattage | 3x32W |
Ballast Lamp Type | T8 |
Start Type | Programmed |
Dimming | Yes |
Not For Sale In | CA |
Product Notes: Dedicated voltage models used most often in pre-existing fixtures. Using Reduced Harmonics (.88 Ballast Factor) Standard Ballast Factor ballasts will provide consistent, efficient light. Typical Application: Industrial factory and warehouse space with basic, no-frills overhead lighting.