Sorry, this product is not available to purchase.
- Estimated life of 22.8 years based on 3 hours use per day
- No lead or mercury means easy and environmentally safe disposal
Product Description–
Lighting Facts Per Bulb |
| Brightness 275 lumens |
|
Estimated Yearly Energy Cost $0.48
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
|
|
Life
Based on 3 hrs/day22.8 years
|
|
Light Appearance
WarmCool
4200 K
|
| Energy Used4 watts |
Philips Brand 4 Watt cool white warm white NON-DIMMABLE lamp generates as much light as many 20 Watt halogen MR-11 lamps.
-
Perfect to use anywhere you are using a 20 Watt MR-11 halogen lamp
-
No lead or mercury means easy and environmentally safe disposal
-
275 Lumens initial light output is comparable to most 20 Watt halogen lamps, while saving 16 Watts in electricity
-
VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
May not be compatible with all electronic transformers. CHECK PRODUCT FIT BEFORE INVESTING IN MANY-Product May Not Fit in Your Fixture. Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life. Well ventilated and open fixtures are required for proper light output and product life. DO NOT "hot swap" this lamp. Turn off fixture before replacing existing bulb.
Full Specs–
Brand | Philips Lighting |
Energy Used | 4 Watts |
Volts | 12 |
Base | GU4 |
Bulb Shape | MR-11/L |
Bulb Color | Cool White |
CRI | 85 |
Color Temperature (Kelvin) | 4200 |
Brightness (Lumens) | 275 |
Bulb Finish | Clear |
Bulb Technology | LED |
Average Rated Life (hr) | 25000 |
Beam Angle (°) | 24 |
Length (in) | 2.1 |
Diameter (in) | 1.4 |
Product Notes: NOT FOR USE WITH DIMMERS, Do Not Use In Enclosed Fixtures, Do Not Expose to Weather. Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation. If Your Fixture Already Has a Lens, Remove It (If Possible) for Best Optics and Heat Exchange. Must Be Used with MAGNETIC Transformer of < 13.5VAC.