Talk to a specialist

Weekdays 8am-7pm EST

243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

3" Dimmable LED Track Head Fixture, Halo Track Type, 2700K, 15° Beam Angle - Silver

SKU: Xi24/15/27K/1450/SL/H | Ordering Code: Xi24/15/27K/1450/SL/H

Sorry, this product is not available to purchase.

Solais Lighting 3" Dimmable LED Track Fixture, Halo Track Type, 2700K, 15° beam angle, silver finish.  Compatible with Halo track.  Excels in high-performance lighting applications that demand the lumen output, center beam and color rendering needed in high-end retail and commercial applications. Industry-leading thermal management system that incorporates active cooling for superior light output and performance.

  • Fully dimmable
  • Equivalent up to a 90W halogen
  • Superior light output
  • No heat sinks
  • Minimizes bulk and weight
  • Allows for greater drive current
  • Maximizes airflow
  • Lower operating temperature

Compatible with the following Lutron dimmers:

  • Diva DV-600
  • Diva CL DV(W)CL-153P
  • Diva DVELV-300P
  • Ariadni AY-600
  • Skylark S-600
  • Skylark Contour CTCL-153P
  • Maestro MA-600
  • Maestro Wireless MRF2-6ND
  • Maestro Wireless MRF2-6ELV
  • Maestro MALV-600
  • Nova NLV-600
  • Toggler TG-600PR
Full Specs

Product Details


Solais Lighting, Inc.

Product Line

Halo Track

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
24 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (lumens)

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
Center Beam Candle Power

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
Beam Spread (°)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)


The decorative finish of the item.

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied


5 year limited

Lighting Facts Approved

Lighting Facts is a program of the US Department of Energy, designed to ensure that the LED products you find on the market meet your expectations for performance.
Lighting Facts Approved
Q & A
Customers Also Viewed
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.