FREE SHIPPING on orders over $99
 

Talk to a specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

TCP 20 Watt LED Wallpack

SKU: TCPBLAZER25 | Ordering Code: TCPBLAZER25

Sorry, this product is not available to purchase.
Description

TCP 20 Watt Blazer LED Wallpack is designed for applications that require clean lighting with a long life and low maintenance requirement.  This includes overnight security lighting for buildings, entrance lighting and overhead door lighting.  This Blazer 20 watt wallpack is a more efficient alternative to metal halide, high pressure sodium and fluorescent wall wallpacks.  This LED wallpack is perfect for hard to reach areas that require clean lighting.    

  • Equivalent to a 35-70 watt high pressure sodium
  • Uses 15 high-power LumiLED Rebel LEDs
  • Constructed from die cast aluminum, which is powder coated in a durable brown finish
  • Impact resistant non-yellowing lens for maximum light output over the life of the luminaire
  • IP 65 weather rating
  • Operating temperature:  -20°F - 140°F
  • Equivalent up to a 35 watt high pressure sodium or a 100 watt metal halide
Full Specs

Product Details

Brand

TCP

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
20 Watts

Line Voltage

120-277

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
71

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
5500

Brightness (lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (lumens)
1125

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
5.5

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
7.5

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
13

Finish

The decorative finish of the item.
 
Finish
Brown

Housing

Die cast

Mounting

Wall mounted

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Installation Type

The way in which a fixture attaches to its relevant surface.
 
Installation Type
Flush

Warranty

5 years limited

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
 
Wet Location
Yes
Reviews
Q & A
Customers Also Viewed