SealTight Fixture for Two F32T8 Lamps
SKU: SLT232UNIV | Ordering Code: SLT-232-UNIV
Sorry, this product is not available to purchase.
Crescent Vapor Tight (SealTight) Fiberglass Wraparound Fixture Ignites Two F32T8 Fluorescent Lamps of 120-277 Voltage.
- One piece fiberglass reinforced housing is impact resistant, prevents rust and corrosioin
- Poured neoprene gasket bonded to housing provides protection against dust, dirt and moisture
- Fixture can be completely washed down
Lamps NOT Included
|Philips - Crescent/Stonco
Number of Lamps
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Watts per Bulb
|Fiberglass Reinforced Polyester
Bulb Type Supplied
Bulb Type Supplied
Type of bulb supplied with the fixture
The way in which a fixture attaches to its relevant surface.
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.