FREE SHIPPING on orders over $99

Speak with a lighting specialist


Weekdays 8am-7pm EST
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900

The LED Authority

30 Watt, 2'x2' Skyway Recessed LED Fixture

SKU: SKS22GPK25A40ULAG | Ordering Code: SKS22GPK25A40ULAG

Sorry, this product is not available to purchase.
  • Estimated life of 45.7 years based on 3 hours use per day

Philips-Lightolier 30 Watt, 2'x2' Skyway Recessed LED fixture. 

Application:  Ideal replacement for anywhere an indoor 2'x2' fluorescent fixture is being used.

Other wattage/lumen output Skyway fixtures are available.

  • Aesthetically pleasing tyiple lens design
  • Curved high light transmission frost white acrylic side lenses
  • Clear acrylic conical prismatic center lens
  • Can provide 48 initial footcandles at 0.56 watts per square foot
  • Field replaceable LED array and drivers accessible from below
  • Integrated thermal management system conducts heat away from LEDs and transfers it to the surrounding environment
  • Hemmed over side rails for maximum safety
  • Fixture ends turned-in for safe handling
  • True mitered corner aluminum lens frame
  • Door jamb finished black on four sides for positiive light stop
  • Spring loaded rooster head latches
  • 18 guage steel hinges
  • Earthquake/hold-down clips
  • Construction to meet NYC Code Requirements or Chicago Plenum is available
  • Not for continuous row mounting
Full Specs


Philips - Lightolier

Input Watts


Line Voltage



Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied


5 years limited
Customers Also Viewed
Customer Reviews
Q & A