FREE SHIPPING on orders over $99
 

Talk to a specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

MaxLite 25W Incandescent Equivalent, 4 Watt, 120 Volt Warm White Dimmable LED Decorative Bulb

SKU: M71638 | Ordering Code: SKCC4.0DLED30F

Sorry, this product is not available to purchase.
Description

Lighting Facts Per Bulb

Brightness 240 lumens
Estimated Yearly Energy Cost $0.48
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day18.3 years
Light Appearance
WarmCool
3000 K
Energy Used4 watts

MaxLite Brand decorative DIMMABLE 4 watt LED bulb generates as much light as many 25 watt halogen bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • 240 Lumens saves 21 watts in electricity
  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
  • Compatible with the following Lutron dimmers:  S-600, LGCL-153PL, LG-600P, CTCL-153PD and SELVB-300P

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Product Details

Brand

MaxLite

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
4 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
25 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Candelabra (E12)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
Bent Tip

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Soft White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
240

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
20000

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
4.6

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
1.5

Warranty

5 year limited

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes
Reviews
Q & A
Customers Also Viewed
BulbFinder BulbFinder