Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

15 Watt equivalent 2.5 Watt, Non-Dimmable 50,000-Hr 2700K Frosted S-14 Marquee LED Bulb

SKU: M73415 | Ordering Code: SKBF2.5DLED27  | UPC: 767627926372

In Stock
Price per Bulb
Each $6.99
Bulbs per Case
12
 x 
Add to Cart
Save to BulbTrack ?

My BulbTrack

Finding the lighting solutions you need might be simple at Bulbs.com, but buying them is even easier. Thanks to our exclusive BulbTrack feature, you can quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page. Products are added to your My BulbTrack page when you check out from your shopping cart or add them from the product description pages.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home. Make buying your replacement lighting as simple as it should be. Create your BulbTrack today!

 
Description

Lighting Facts Per Bulb

Brightness 125 lumens
Estimated Yearly Energy Cost $0.3
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
2700 K
Energy Used2.5 watts

MaxLite Brand S14 NON-DIMMABLE 2.5 watt LED bulb generates as much light as many 15 watt halogen bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • 125 Lumens saves 12 watts in electricity
  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
  • UL listed for Wet Location

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Product Details

Brand

MaxLite

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
2.5 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
15 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
S-14

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Warm White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
2700

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
125

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Frosted

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Operating Temperature (°F)

The ambient temperature in which the lamp can safely operate.
 
Operating Temperature (°F)
-4 to 131

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
3.74

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
1.97

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
 
Wet Location
Yes
Reviews
Q & A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

2 Questions | 2 Answers
Displaying questions 1-2
  • Q:

    Is the base the same size as a standard bulb?
    Asked on 4/1/2015 by terry9417

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist

      A:

      This bulb has an E26 or medium screw base.It is the same base type that your traditional table lamp bulb would have.

      Answered on 4/7/2015 by Anonymous
  • Q:

    Can this bulb be used with a daylight sensor?
    Asked on 2/2/2015 by denf from Hilton Head, SC

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist

      A:

      Yes, this LED can be used with a sensor.

      Answered on 2/5/2015 by Anonymous
Displaying questions 1-2

Do you have a question about this product? 

Customers Also Viewed
 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.