FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

MaxLite 50W Halogen Equivalent, 9 Watt Dimmable, 3000K, 4" LED Recessed Downlight Retrofit

SKU: 71778 | Ordering Code: RR40930W

Sorry, this product is not available to purchase.
  • Estimated life of 45.7 years based on 3 hours used per day
Description

MaxLite dimmable 9 watt 4" LED downlight retrofit fixture replaces existing 50 watt R20 incandescent lamps with a more energy efficient, longer lasting, and more technologically advanced alternative. Comes with an E26 medium screw base adapter that can be used with most 4" housings, including IC/airtight and non-IC incandescent recessed housings.  Suitable for damp or wet locations, including kitchens and showers.

  • Dimmable at 120V only

  • Installs into 4" recessed cans using blade springs
  • Polycarbonate lens
  • Perfect to use anywhere you are using R20 lamps in recessed ceiling fixtures

  • No lead or mercury means easy and environmentally safe disposal

  • 500 lumens initial light output is comparable to most 50 watt incandescent lamps, while saving 41 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 50,000 hours of operation as it does when brand new

  • Compatible with the following 120V dimmers
    • Lutron Nova T Ntelv 300 & 600
    • Lutron Diva Dvelv 300P & 303P
    • Leviton Acenti Ate06-1Lw
    • Trimatron 703W
  • Compatible with the following recessed cans

    • Halo - H99T, H99RT, H99ICTAll-Pro - ET400, ET400R, ET400RT0

    • Juno - TC1, TC1R, IC1P
    • ALL-Pro - ET400, ET400R, ET400RT
    • Capri - R4, RR4, R4ASIC
    • Lithonia - L3, L3R
    • Thomas - PS4, PS4RM, PS4ASIV

DO NOT "hot swap" this fixture.  

Full Specs

Brand

MaxLite

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
9 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120/277

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
500

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
90

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
3.5

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
5

Finish

The decorative finish of the item.
 
Finish
White

Housing

Aluminum die-cast

Mounting

Blade spring

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Warranty

5 year limited

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
 
Wet Location
Yes

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes
Customers Also Viewed
Customer Reviews
Q & A