Talk to a specialist

Weekdays 8am-7pm EST

243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

63 Watt LED Wallpack Light Fixture


Sorry, this product is not available to purchase.

Relume Technologies 63 Watt Forward Throw Wallpack LED Light Fixture is the energy saving solution for building facades, storage areas, entrances, corridors and other pedestrian areas.  Patented Relume Silver Circuitry™ ensures excellent thermal management and low LED junction temperatures - the key to long LED life. The LED light engine is protected by a molded prismatic borosilicate glass lens.    

Product will ship in approximately 10 business days from receipt of order.  

  • Driver operates over voltages ranging from 120-277 and has a power factor greater than 0.98 and a total harmonic distortion (THD) of less than 20%
  • Fluctuations in line voltage have no effect on luminous output
  • Driver has voltage surge protection to withstand high repetition noise transients
  • Constructed from die cast aluminum, with hinged front frame and powder coated with high-performance polyester resin for a rugged and maintenance-free finish.  
  • Equivalent up to a 150 watt HID
Full Specs

Product Details


Relume Technologies

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
63 Watts

Line Voltage



Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)


The decorative finish of the item.
Dark Bronze


Die cast


Can be mounted to electrical box or direct to surface

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied


7 year limited

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Wet Location
Q & A
Customers Also Viewed
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.