FREE SHIPPING on orders over $99
 

Talk to a specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

30 Foot Cool White 6400 Kelvin LED Flexible Rope Light Kit with Mounting Clips

SKU: LR-LED-CW-30 | Ordering Code: LR-LED-CW-30  | UPC: 714176263021

Sorry, this product is not available to purchase.
Description

American Lighting Brand 30' Flexbrite LED rope light kit.  Ideal for cove lighting, cabinets (above or below), bookshelves, toe kick (kitchen or bath), and decks. Flexbrite LED emits virtually no heat and is cool to the touch. Contains everything you need for easy, professional results - One (1) 30' strip of LED Flexbrite, attached power cord and thirty (30) mounting clips and screws.  Suitable for commercial or residential lighting. Track # RL-TRACK-4 is recommended for straight line installations and will help in keeping the rope light from turning after installation.

This product is not a chasing rope light and can't be cut. For chasing rope lights please contact Bulbs.com at 888.455.2800. A separate chasing controller will also be needed. Product can't be cut.

You can interconnect multiple rope lights without any tools. Although, for best color matching of LEDs we recommend using the same length kits (ex. all 9' kits). Connecting a 9' kit to a 15' kit may result in visible color difference in LEDs. 

In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube.

  • Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.
  • Line voltage kits are economical - no drivers needed
  • 3mm LEDs at 1” spacing emit up to 34 lumens per foot
  • Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply)
  • Suitable for indoor and outdoor use
  • Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light
  • 1” LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series)
  • Use clips to hold in place for most indirect view installations
  • Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging
  • Easy to install - kits interconnect and plug into standard 120V AC receptacles
Full Specs

Product Details

Brand

American Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
23 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
Rope Light

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
75

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
6400

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
60000

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
120

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
360

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
0.5

Finish

The decorative finish of the item.
 
Finish
Cool White

Mounting

Clear plastic mounting clips or track

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Warranty

1 year limited

Linkable

Yes

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes
Reviews
Q & A
Customers Also Viewed
BulbFinder BulbFinder