FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 40 Degree Flood Lamp with GU10 Base

SKU: LED7MR16GU1030KFL | Ordering Code: LED7MR16GU1030KFL  | UPC: 762148250104

$11.79 per Bulb
Add to Cart
Save to BulbTrack ?

My BulbTrack

Finding the lighting solutions you need might be simple at Bulbs.com, but buying them is even easier. Thanks to our exclusive BulbTrack feature, you can quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page. Products are added to your My BulbTrack page when you check out from your shopping cart or add them from the product description pages.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home. Make buying your replacement lighting as simple as it should be. Create your BulbTrack today!

 
In Stock

Add 9 to your cart to get free ground shipping *

  • Energy efficient replacement for a conventional 50 watt bulb
  • Estimated life of 22.8 years based on 3 hours used per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Lighting Facts Per Bulb

Brightness 525 lumens
Estimated Yearly Energy Cost $0.84
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day22.8 years
Light Appearance
WarmCool
3000 K
Energy Used7 watts

TCP MR-16 GU10 base dimmable 7 watt flood LED bulb generates as much light as many 50 watt halogen bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • 525 lumens saves 43 watts in electricity
  • Very long life - Rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Brand

TCP

Product Line

Elite Series

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
7 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
50 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
GU10

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
MR-16

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Soft White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
82

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
525

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
 
Center Beam Candle Power
1057

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25000

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
 
Operating Temperature (°F)
-4 to 104

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
40

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
2

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
2

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes
Customers Also Viewed
Customer Reviews

REVIEW SNAPSHOT®

by PowerReviews
TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 40 Degree Flood Lamp with GU10 Base
 
3.0

(based on 2 reviews)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
1.0

Failure

By - DM

From Seattle, WA

About Me Quality Oriented, Value Oriented

Verified Reviewer

Pros

    Cons

    • Burns Out Quickly
    • Flickers

    Best Uses

      Comments about TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 40 Degree Flood Lamp with GU10 Base:

      I have been trying out different LEDs with a view to replacing the Halogen MR16 bulbs we mostly use at an art gallery. I bought three of these and one of them stopped working completely and the other two have started to flicker. They are nowhere near reaching their supposed life expectancy.
      Not a good product.

      • Primary use:
      • Business
       
      5.0

      Great bulb

      By Sargent Pepper

      From Oceanside NY

      About Me Licensed Electrician, Quality Oriented

      Verified Buyer

      Comments about TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 40 Degree Flood Lamp with GU10 Base:

      Stopped using low voltage MR-16 led lamps for new high hat installations. Seems like you always have to find the right dimmer or the magnetic transformer sometimes hums on the high hat can.Not all the time sometimes. With these line voltage GU10 bulbs I use now a line voltage high hat without any transformer that takes a GU10bulb. Never hums, all led line voltage dimmers work just great w/ this bulb

      • Primary use:
      • Business

      Displaying reviews 1-2

      Back to top

      Q & A

      Do you have questions about this product?

      Get answers from real customers and in-house experts with AnswerBox.

      1 Question | 1 Answer
      Displaying question 1
      • Q:

        What is the difference between an MR-16 LED bulb and a PAR-16 LED bulb?
        Asked on 9/2/2014 by CharlieB

        1 answer

        • Bulbs.com LS1 Certified Lighting Specialist

          A:

          With other technologies such as Halogen, the 'MR' and 'PAR' say a lot about the bulb. 'MR' being mini-reflector' and 'PAR' being Parabolic Anodized Reflector or a sealed beam reflector. With LED, they are very similar. The diameter is 16/8" or 2" inches as noted by MR16 and PAR16. Keep in mind that the base of these bulbs may vary. This product has a GU10 or twist 'n' lock base where most MR16s will have a pin base and many PAR16 bulbs will have a medium or E26 base.

          Answered on 9/3/2014 by Anonymous
      Displaying question 1

      Do you have a question about this product?