FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 20 Degree Narrow Flood Bulb with GU5.3 Base

SKU: LED712VMR16V30KNFL | Ordering Code: LED712VMR16V30KNFL  | UPC: 762148270072

$8.49 per Bulb
Add to Cart
Save to BulbTrack ?

My BulbTrack

Finding the lighting solutions you need might be simple at Bulbs.com, but buying them is even easier. Thanks to our exclusive BulbTrack feature, you can quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page. Products are added to your My BulbTrack page when you check out from your shopping cart or add them from the product description pages.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home. Make buying your replacement lighting as simple as it should be. Create your BulbTrack today!

 
In Stock

Order within the next 8 hours 8 minutes to ship today

Free ground shipping on orders over $99*

  • Energy efficient replacement for a conventional 50 watt bulb
  • Estimated life of 22.8 years based on 3 hours used per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Lighting Facts Per Bulb

Brightness 500 lumens
Estimated Yearly Energy Cost $0.84
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day22.8 years
Light Appearance
WarmCool
3000 K
Energy Used7 watts

TCP ENERGY STAR® qualified dimmable NR-16 7 watt narrow flood LED bulb generates as much light as many 50 watt halogen bulbs. 

  • Intended for low voltage transformers with AC output. Not intended for DC operation
  • No lead or mercury means easy and environmentally safe disposal
  • Saves 43 watts in electricity compared to a 50 watt halogen
  • Very long life - Rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Brand

TCP

Product Line

Elite Series

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
7 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
50 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
12

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
GU5.3

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
MR-16

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Soft White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
82

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
500

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
 
Center Beam Candle Power
3296

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25000

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
 
Operating Temperature (°F)
-4 to 104

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
 
Beam Angle (°)
20

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
2

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
2

ENERGY STAR Qualified

ENERGY STAR is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. ENERGY STAR-qualified devices use less energy without compromising functionality.
 
ENERGY STAR Qualified
Yes

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes
Customers Also Viewed
Customer Reviews

REVIEW SNAPSHOT®

by PowerReviews
TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 20 Degree Narrow Flood Bulb with GU5.3 Base
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 1 customers found this review helpful)

 
5.0

Works for us!

By Administrator

From Geneva, IL

About Me Quality Oriented, Value Oriented

Verified Buyer

Pros

  • Bright
  • Long Life
  • Reduces Energy Costs
  • Runs Cool

Cons

    Best Uses

      Comments about TCP 50 Watt Equiv., 7 Watt, LED MR-16 Dimmable 3000K 20 Degree Narrow Flood Bulb with GU5.3 Base:

      We are a small non-profit museum and are trying to conserve energy and costs as well as preserve our artifacts. We are gradually replacing all of our fluorescent, incandescent and halogen lighting with LED bulbs. We see a huge difference in our look as well as not having to replace bulbs as often as before. We THINK we see a difference in our energy costs but too soon to tell. We use over 100 7W LED equivalents to halogen MR16s in the track lighting in our galleries. The light LEDs produce is supposed to be easier on our textiles and photos that we display. We also have two spots (60W incandescent equivalent) that are on 24/7 in our entry which we have not had to replace in at least 6 months if not more. They cost more, but seem to be getting less pricier as incandescents are being phased out. What we spend in cost per bulb we save in energy and bulb replacement costs and labor.

      • Primary use:
      • Business

      Displaying review 1

      Back to top

      Q & A