FREE SHIPPING on orders over $99
 

Talk to a specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

TCP 60 Watt Incandescent Equiv., 10 Watt, 120 Volt Dimmable 2700K Warm White LED A-19 Bulb

SKU: LED10A19D27K | Ordering Code: LED10A19D27K  | UPC: 762148257127

Sorry, this product is not available to purchase.
Description

Lighting Facts Per Bulb

Brightness 800 lumens
Estimated Yearly Energy Cost $1.2
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day22.8 years
Light Appearance
WarmCool
2700 K
Energy Used10 watts

TCP A-19 dimmable 10 watt LED bulb generates as much light as many 60 watt incandescent bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • 800 lumens saves 50 watts in electricity
  • Very long life - Rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Full Specs

Product Details

Brand

TCP

Product Line

Elite Series

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
10 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
60 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
A-19

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Warm White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
82

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
2700

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
800

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Frosted

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25000

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
 
Operating Temperature (°F)
-4 to 104

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
4.3

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
2.4

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes
Reviews
Q & A
Customers Also Viewed
BulbFinder BulbFinder