Talk to a specialist

Weekdays 8am-7pm EST

243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

LED Dusk-to-Dawn Indoor/Outdoor Step Light Kit, Square

SKU: B770220 | Ordering Code: LED/STEP10SQ

Sorry, this product is not available to purchase.

Bulbrite Indoor/Outdoor Dusk-to-Dawn LED Step Light kit.  Sleek, contemporary design with no wiring or digging required.

What's in the box:

  • Ten 1.3" square LED step lights each with 16.5 feet of cable
  • 0.108 watts per LED
  • Dusk to Dawn sensor with 16.5 feet of cable
  • 12 Volt transformer that plugs into a typical 2-prong or 3-prong wall outlet.  Outlet must be in a dry location.
  • Ten port junction box with 33 feet of cable.  Has additional side port for Dusk to Dawn sensor.
  • Illustrated and detailed instructions

What's needed:

  • Handheld drill
  • Two drill bits:  15/16" (for step lights) and 15/32" (for Dusk to Dawn sensor)
  • Two typical screws to mount junction box

UL Listed and IP66 rated as water and dust resistant.  Expandable up to 50 step lights.

Full Specs

Product Details



Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
1.1 Watts

Line Voltage



The end (or ends) of the lamp that fits into the socket.

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied

Weather Resistant



Q & A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

3 Questions | 3 Answers
Displaying questions 1-3
  • Q:

    What is the size of the hole (diameter and length) required to accommodate the step light ?
    Asked on 3/11/2015 by HerbH from Brightwaters, New York

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist


      The back of the light is round and measures 1" diameter and ~ 1.5" deep, including the cord that protrudes out of the back of the light.

      Answered on 3/16/2015 by Anonymous
  • Q:

    can this unit be hooked up to a dimmer switch? The lights are great but are just way to bright for my application and I would love it if I could dim them down.
    Asked on 10/2/2014 by Jeff from Minnesota

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist


      No, this is not a dimmable product.

      Answered on 10/7/2014 by Anonymous
  • Q:

    how many watts does each kit use?

    Asked on 12/2/2013 by Larry

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist


      1.1 watts total

      Answered on 12/4/2013 by Anonymous
Displaying questions 1-3

Do you have a question about this product? 

Customers Also Viewed
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.