Talk to a specialist

Weekdays 8am-7pm EST

243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

150' LED Rope Light Reel - Red

SKU: LED-DL-RE-150 | Ordering Code: LED-DL-RE-150

Sorry, this product is not available to purchase.

American Lighting Brand 150' LED Rope Light Reel offers a vibrant, long lasting and cost effective alternative to traditional incandescent rope light, consuming 85% less energy and lasting up to four times longer.  Ideal for cove lighting, cabinets (above or below), bookshelves, toe kick (kitchen or bath), and decks. Emits virtually no heat and is cool to the touch. 

Includes five connector kits (power cords, one is pre-attached) and 50 mounting clips. Suitable for commercial or residential lighting. 

This product is not a chasing rope light.  For chasing rope lights please contact Bulbs.com at 888.455.2800.  A separate chasing controller will also be needed.

Track # DL-TRACK-4 is recommended for straight line installations and will help in keeping the rope light from turning after installation.  Bulk reels can be field cut (no longer UL listed if reel is cut and/or spliced) for maximum project flexibility.  Sold in 150' reels only.  Also available in amber, blue, green, white, warm white and yellow.

In any outdoor installation, all conductors must be coated with dielectric grease, and properly sealed with silicone and shrink tube.

  • Indoor/Outdoor rated
  • 120V, 60Hz AC operation (1.6A inverter converts AC to DC)
  • The flexibility of incandescent rope light - without the heat!
  • Uses the highest grade PVC available and a newly developed UV inhibitor to help ensure its longevity
  • Heat resistant clear PVC housing with LEDs every 1.2", positioned horizontally
  • Provide switched outlet for On/Off and dimming control
  • Dimmable with most standard incandescent, low voltage magnetic and low voltage electronic dimmers. Check local electrical code and minimum load
  • UL Listed if the whole 150' reel is used with the pre-attached connector kit - no alteratione or cuts to it
Full Specs

Product Details


American Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
120 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
Bulb Shape
Rope Light


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
Beam Spread (°)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
Diameter (in)


The decorative finish of the item.


Clear plastic mounting clips or track

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location
Q & A

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    I will be cutting this rope. What is the part number for teh connector kit?
    Asked on 7/10/2013 by Craig from LA

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist


      This kit includes five connector kits (power cords, one is pre-attached) and 50 mounting clips. Please contact Customer Service at 888-455-2800 if you require further assistance.

      Answered on 7/11/2013 by Anonymous
Displaying question 1

Do you have a question about this product? 

Customers Also Viewed
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.