Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

20 Watt Equivalent, 2 Watt, 12 Volt 37mm LED Reflector for Elevator Ceiling Bulb

SKU: TECLE2WGBF | Ordering Code: LE2WGBF (R12, 12 Volts)

Sorry, this product is not available to purchase.

Product Details

Brand

TCP

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
2.2 Watts

Incandescent/Halogen Equivalent

The wattage value of an incandescent or halogen lamp of similar brightness.
 
Incandescent/Halogen Equivalent
20 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
12

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Double Contact Bayonet (BA15d)

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
R-12

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Neutral White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3200

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
110

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25000

Operating Temperature (°F)

The ambient temperature in which the lamp can safely operate.
 
Operating Temperature (°F)
-4 to 104

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
1.7

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
1.5

Lighting Facts Per Bulb

Brightness 110 lumens
Estimated Yearly Energy Cost $0.26
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day22.8 years
Light Appearance
WarmCool
3200 K
Energy Used2.2 watts
Description
 
Reviews
 
Q & A

TCP Brand elevator ceiling bulb ENERGY STAR qualified DIMMABLE 2 watt LED bulb generates as much light as many 20 watt halogen bulbs. 

  • No lead or mercury means easy and environmentally safe disposal
  • 110 Lumens saves 18 watts in electricity
  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new
  • ENERGY STAR qualified

Not recommended for use in fully enclosed fixtures because heat buildup will shorten life. Do not “hot swap” this bulb. Turn off fixture before replacing existing bulb.

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    Can I use these lamps with the 50W ALR transformer already install or do I need to install a different transformer?

    Can I use these in a elevator operation?
    Asked on 9/17/2013 by Dean from Seattle,WA

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist

      A:

      Sorry for the delay in response. We have contacted the manufacturer and have just received a response. While yes, this is intended for use in an elevator, the transformer should be replaced. Using the existing transformer may damage the bulb. Please contact Customer Service for further assistance at 888-455-2800.

      Answered on 9/23/2013 by Anonymous
Displaying question 1

Do you have a question about this product? 

 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.