FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

Lutron 120-277 Volt 2-Lamp T5/HO 54 Watt Hi-Lume 3D Electronic Dimming Ballast

SKU: H3DT554CU210 | Ordering Code: H3DT554CU210  | UPC: 027557977180

$109.99 per Ballast
Ballast
Add to Cart
Save to BulbTrack ?

My BulbTrack

Finding the lighting solutions you need might be simple at Bulbs.com, but buying them is even easier. Thanks to our exclusive BulbTrack feature, you can quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page. Products are added to your My BulbTrack page when you check out from your shopping cart or add them from the product description pages.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home. Make buying your replacement lighting as simple as it should be. Create your BulbTrack today!

 
On BackorderTypically ships in 5-7 business days

This item qualifies for free ground shipping *

  • Ignites up to two T5 lamps
Description

Lutron brand Electronic Dimming Ballast for Two F54T5/HO Fluorescent Lamps with line voltage of 120-277.

Lutron's Hi-Lume 3D electronic dimming ballasts provide a full-range of 100% to less than 1% fluorescent dimming.

  • 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance
  • Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling
  • Lamps turn on to any dimmed level without going to full brightness
  • Low harmonic distortion throughout the entire dimming range maintains power quality
  • Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing and relay failure
  • Ultra-quiet operation
  • Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground

 

 

Full Specs

Brand

Lutron Electronics

Input Volts

120/277

Input Watts

114

Number of Lamps

2

Ballast Factor

The percentage of a lamp's rated lumen output that can be expected when operated on a specific commercially available ballast. For example, a ballast with a ballast factor of 0.93 will result in the lamps emitting 93% of their rated lumen output. A ballast with a lower ballast factor results in less light output and also generally consumes less power.
 
Ballast Factor
1

Ballast Type

Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
 
Ballast Type
Electronic

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
18

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
1.18

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
1

Power Factor

95%

Total Harmonic Distortion (THD)

Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
 
Total Harmonic Distortion (THD)
<10%

Lamps by Wattage

2x54W

Ballast Lamp Type

The type of bulb the ballast can fire.
 
Ballast Lamp Type
T5

Start Type

For Ballasts, indicates the method the ballast uses to start its bulbs. HID ballasts can be Probe or Pulse start. Fluorescent ballasts can be Rapid, Instant or Programmed start. For HID and Fluorescent bulbs, indicates the start-type of ballast that the bulb will work with.
 
Start Type
Programmed

Dimming

Dimming ballasts provide dimming capability when used with an appropriate controller and lamp.
 
Dimming
Yes

Product Notes: Dedicated voltage models used most often in pre-existing fixtures. Using Reduced Harmonics (.88 Ballast Factor) Standard Ballast Factor ballasts will provide consistent, efficient light. Typical Application: Industrial factory and warehouse space with basic, no-frills overhead lighting.

Customers Also Viewed
Customer Reviews
Q & A