Talk to a specialist

Weekdays 8am-7pm EST

243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

5', 24V LED Flexible Tape, 2700K - Black Face

SKU: 98683SW-12 | Ordering Code: 98683SW-12

Sorry, this product is not available to purchase.

Sea Gull Lighting Brand 5' Ambiance® Flexible LED Tape Light with black face.  Economical, super bright. Connects to other sections of 24V LED Tape lighting.  LEDs are on a flexible copper strip encased in optically clear protective coating.  Works and dims with all 24VAC magnetic transformers.  For increased light output LED tape lighting can also be powered by 24 VDC LED power supply unit.  Installs easily on surfaces with included clips or self adhering industrial 3M adhesive (provided on back of strip). 

Power supply required. Use # 98051-12 for plug-in power or # 98062-12 for direct wire transformer.

  • Versatile LED linear lighting, ultra low profile 1/8"H x 3/8"W - easily fits into any space, flexible bend lengthwise or curve laterally
  • The look and feel of halogen and xenon while reducing energy and operating costs by up to 90%
  • Lumen package is comparable to traditional undercabinet lighting 10W xenon to 20W halogen 4" to 6" on center
  • Long 40,000 hour life lasts 20 times longer than halogen for maintenance free operation
  • 24VAC or 24VDC operation, dimmable with a wide range of incandescent and ELV dimmers
  • Maximum run length for 24V is 40 feet
  • ETL listed, damp location
  • Environmentally friendly - contains no mercury and emits no UV or IR
  • Also available in 2", 12" and 16-12" sections and with a wide variety of connectors
Full Specs

Product Details


Sea Gull Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
15 Watts


A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)

Brightness (lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
Brightness (lumens)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)


The decorative finish of the item.


Use self adhering industrial 3M adhesive (provided on back of strip) or included mounting clips.

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied


5 year limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
Damp Location
Q & A
Customers Also Viewed
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.