Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

15 Watt, 75W Halogen Equivalent, DIMMABLE 6" LED Recessed Downlight

SKU: 423517 | Ordering Code: 15DL6/END/F90 2700 DIM 6/1

Sorry, this product is not available to purchase.
Description

Philips Lighting DIMMABLE 6" LED Recessed Downlight, 15 Watt lamp replaces existing BR40 incandescent lamps with a more energy efficient, longer lasting, and more technologically advanced alternative. Can smoothly dim down to 5% power on most dimmers.

  • Perfect to use anywhere you are using BR40 lamps in recessed ceiling fixtures

  • No lead or mercury means easy and environmentally safe disposal

  • 800 Lumens initial light output is comparable to most 75 Watt incandescent lamps, while saving 60 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 45,000 hours of operation as it does when brand new

Before mounting the downlight into the housing please make sure the housing contains two brackets used to receive the torsion springs. Below is a list of recessed cans that the Philips DL6 recessed downlight is compatible with.  The absence of a can from this compatibility list does not necessarily indicate that the DL6 is not compatible with a particular can. 

Compatible Recessed Cans:

  • Capri - CR1NB, CR1NBQP, CRR1NB, CRR1QPNB, QL1NB, QL1NBQP, QL6NB, QL6NBQP
  • Cooper (All-Pro) - E1700ATNB, E1700NB
  • Cooper (Halo) - H71CATNB, H71CTNB, H7TNB
  • Lithonia - L7X, LC6
  • Nora - NH1C-17QNBAT

Compatible with other recessed cans with modifications.  

Full Specs

Product Details

Brand

Philips Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
15 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
80

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
2700

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
800

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
45000

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
90

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
6.9

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
7.35

Finish

The decorative finish of the item.
 
Finish
White

Bulb Type Supplied

Type of bulb supplied with the fixture
 
Bulb Type Supplied
LED

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes
Reviews
Q & A

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    I have 5" ID cans, what is the maximum OD of the "bulb shape inside the ring?
    Asked on 6/26/2013 by Ken from Wilton, CT

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist

      A:

      If by OD, you are referring to overall diameter, the largest bulb diameter would be 3.75" or a PAR30, BR30 or R30 lamp.

      Answered on 7/12/2013 by Anonymous
Displaying question 1

Do you have a question about this product? 

Customers Also Viewed
 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.