FREE SHIPPING on orders over $99
 

Speak with a lighting specialist

1-888-455-2800

Weekdays 8am-7pm EST

Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com

The LED Authority

Satco 13 Watt, Non-Dimmable, 4-Pin Horizontal 4000K G24q LED Bulb, Ballast Bypass

SKU: S9310 | Ordering Code: 13W/H/LED/CFL/840/4P  | UPC: 045923093104

$21.95 per Bulb
Add to Cart
Save to BulbTrack ?

My BulbTrack

Finding the lighting solutions you need might be simple at Bulbs.com, but buying them is even easier. Thanks to our exclusive BulbTrack feature, you can quickly and easily order the products you have purchased in the past or plan to order in the future by simply adding them to your My BulbTrack page. Products are added to your My BulbTrack page when you check out from your shopping cart or add them from the product description pages.

Once a product has been added to My BulbTrack, ordering it is as easy as entering the quantity or clicking on the product image. You can even add notes to each product to record where it is used in your business or home. Make buying your replacement lighting as simple as it should be. Create your BulbTrack today!

 
In Stock

Order within the next 9 hours 34 minutes to ship today

Add 5 to your cart to get free ground shipping *

  • Estimated life of 45.7 years based on 3 hours use per day
  • No lead or mercury means easy and environmentally safe disposal
Description

Lighting Facts Per Bulb

Brightness 925 lumens
Estimated Yearly Energy Cost $1.57
Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use
Life
Based on 3 hrs/day45.7 years
Light Appearance
WarmCool
4000 K
Energy Used13 watts

Satco's non-dimmable G24q lamp is ballast bypass meaning not only a reduction in your electric bill but also in labor costs - no need to rewire or change this bulb.

  • Replaces 18, 26, 32 and 42w CFL
  • Ballast bypass - no rewiring needed
  • Instant on
  • No Flicker
  • Horizontal operation
  • 3 year limited warranty

Turn off fixture when replacing the bulb. If the bulb or fixture exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off power and remove the bulb.  

Full Specs

Brand

Satco Products, Inc.

Model Number

13W/H/LED/CFL/840/4P

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
13 Watts

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
G24q

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
Twin Tube Alt

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Cool White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
84

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
4000

Brightness (Lumens)

A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
925

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Opaque

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50000

Operating Temperature (°F)

The ambient temperature in which the product can safely operate.
 
Operating Temperature (°F)
-40 to 160

Beam Angle (°)

The width of a light beam, expressed in degrees. The beam angle is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam angle of 25 degrees.
 
Beam Angle (°)
120

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
5.3

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
1.8

Mounting

Horizontal

Warranty

3 Year Limited

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Ballast Bypass

Bypassing (removing) the traditional fluorescent ballast will allow the fixture to run on line voltage. A ballast is not needed to power this lamp.
 
Ballast Bypass
Yes

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
no
Customers Also Viewed
Customer Reviews
Q & A
Does ballast bypass mean that this Satco bulb can be used in fixtures wired with existing ballasts?

Steve

No this means the ballast needs to be removed and be wired directly to the line. No ballast to be used.

Anonymous

Ballast Bypass means no rewiring or buying pricey ballasts. Cut out the current ballast and plug the bulb in. It has a built-in universal driver that allows the lamp to operate between 120-277V of line voltage.

Anonymous