243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
Bulbs Logo

35 Watt, 48" Vapor Tight LED Fixture, 4100K

SKU: LSV4806SU3541 | Ordering Code: LSV4806SU3541

Sorry, this product is not available to purchase.

Product Details



Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
Energy Used
35 Watts

Line Voltage


Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in)

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
Width (in)

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in)

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
Average Rated Life (hr)

Light Output (Lumens)

A unit measurement of the rate at which a lamp produces light, most often provided in lumens or candlepower. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation.
Light Output (Lumens)


Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.


Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
Color Temperature (Kelvin)


Glass Reinforced Polyester


Ceiling, surface or wall

Bulb Type Supplied

Type of bulb supplied with the fixture
Bulb Type Supplied

Wet Location

Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Wet Location

Vapor Proof



5 years limited
Q & A

MaxLite 35 Watt, 4100K, 48" Vapor Tight Fixture.  This cost effective fixture features a full length polycarbonate lens and a one-piece white glass reinforced polyester (GRP) body.  Ideal for parking garages, car washes and any place where water may get into a fixture.

  • Thermal/lumen balanced light engines
  • 20 gauge steel body and end caps
  • Clear acrylic prismatic lens
  • Electrostatic paint pre-assembly
  • Back and end knockouts
  • Class II driver, with 0-10V dimming option available
  • Low power consumption
  • For covered use only - damp rated
  • White finish standard
  • Optional wire guard and/or motion sensor available
  • Also available in:
    • 48" 28W 4100K and 5000K, 35W 5000K and 45W 4100K and 5000K
    • 24" 20W 4100K and 5000K, 24" 28W 4100K and 5000K, 24" 35W 4100K and 5000K
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.